View IP140MA_355238.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

IP140MA SERIES IP140M SERIES IP78M00A SERIES IP78M00 SERIES 0.5 AMP POSITIVE VOLTAGE REGULATOR
!
2
1
3
FEATURES
Pin 1 - VIN Pin 2 - VOUT Case - Ground Pin 1 - VIN Pin 2 - Ground Pin 3 - VOUT
* OUTPUT CURRENT UP TO 0.5A * OUTPUT VOLTAGES OF 5, 12, 15V * 0.01% / V LINE REGULATION * 0.3% / A LOAD REGULATION * THERMAL OVERLOAD PROTECTION * SHORT CIRCUIT PROTECTION * OUTPUT TRANSISTOR SOA PROTECTION * 1% VOLTAGE TOLERANCE (-A VERSIONS) DESCRIPTION
Temp. Range -55 to +150C " " "
The IP140MA and IP78M00A series of voltage regulators are fixed output regulators intended for local, on-card voltage regulation. These devices are available in 5, 12, and 15 volt options and are capable of delivering in excess of 500mA over temperature. The A-suffix devices are fully specified at 0.5A, provide 0.01% / V line regulation, 0.3% / A load regulation, and 1% output voltage tolerance at room temperature. Protection features include safe operating area, current limiting and thermal shutdown.
H Package - TO-39
SMD 1 CERAMIC SURFACE MOUNT
GND NC NC V IN
1 2 3 4
8 7 6 5
NC NC VOUT NC
8 Pin J Package
Order Information
Part H-Pack Number (TO-39) IP78MxxAzz IP78Mxxzz IP140MAzz-xx IP140Mzz-xx Note: xx = Voltage Code (05, 12, 15) eg. IP78M05J J-Pack CERDIP SG-Pack SMD
zz = Package Code (H, J, SG) IP140MAH-12
ABSOLUTE MAXIMUM RATINGS (TC = 25C unless otherwise stated)
VI PD RqJC RqJC RqJA TJ Tstg DC Input Voltage Power Dissipation Thermal Resistance Junction to Case Thermal Resistance Junction to Case Thermal Resistance Junction to Ambient Operating Junction Temperature Range Storage Temperature - H Package - SG Package - J Package (for VO = 5, 12, 15V) 35V Internally limited 1 20C / W TBA C / W 119C / W -55 to 150C -65 to 150C
Note 1. Although power dissipation is internally limited, these specifications are applicable for maximum power dissipation PMAX of 2W for the H-Package ,1.05W for the J-Package and 15W for the SG-Package.
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
Prelim.7/00
IP140MA SERIES IP140M SERIES IP78M00A SERIES IP78M00 SERIES
ELECTRICAL CHARACTERISTICS
Parameter Test Conditions IO = 100mA VO Output Voltage IO = 5mA to 350mA PD PMAX VIN = 7.5V to 20V IO = 200mA IO = 500mA TJ = -55 to 150C VIN = 7V to 25V 3 3 3 5 4 0.1 0.2 40 IO = 300mA IO = 100mA TJ = -55 to 150C 65 65 80 80 2 300 0.7 1.0 0.5 2.5 600 1.4 2.0 0.7 300 1.0 0.5 10 10 10 50 6 0.5 0.8 200 62 62 2.5 600 1.6 dB V mA A mV C 40 4 50 25 50 50 6 0.5 mA 0.8 200 mV mA mV VIN = 8V to 25V TJ = -55 to 150C VIN = 8V to 12V TJ = -55 to 150C IO = 350mA TJ = -55 to 150C IO = 5mA to 500mA VIN = 10V IO = 200mA TJ = -55 to 150C VIN = 8V to 25V TJ = -55 to 150C VN Output Noise Voltage f = 10Hz to 100kHz f = 120Hz VIN = 8V to 18V IO = 350mA IO = 5mA to 500mA VIN = 10V VIN = 10V 4.85 5.15 4.75 5.25 VIN = 10V IP78M05A IP140MA-05 Min. Typ. Max. 4.95 5 5.05 IP78M05 IP140M-05 Min. Typ. Max. 4.8 5 5.2 V Units
DVO
Line Regulation
DVO
IQ
Load Regulation Quiescent Current
DIQ
Quiescent Current Change
mV
DVIN DVO
Isc Ipk
Ripple Rejection Dropout Voltage
Short Circuit Current VIN = 35V Peak Output Current VIN = 10V Average Temperature Coefficient of VO IO = 5mA
1) All characteristics are measured with a capacitor across the input of 0.22mF and a capacitor across the output of 0.1mF. All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (tp voltage changes due to changes in internal temperature must be taken into account separately. 2) Test Conditions unless otherwise stated: TJ = 25C PMAX = 2W for H Package (TO-39) PMAX = 1.05W for J Package (CERDIP) PMAX = 15W for SG Package (SMD1)
10ms, d 5%). Output
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
Prelim.7/00
IP140MA SERIES IP140M SERIES IP78M00A SERIES IP78M00 SERIES
ELECTRICAL CHARACTERISTICS
Parameter Test Conditions IO = 100mA VO Output Voltage IO = 5mA to 350mA PD PMAX TJ = -55 to 150C IO = 200mA VIN = 14.5V to 30V VIN = 16V to 30V TJ = -55 to 150C IO = 500mA VIN = 16V to 22V TJ = -55 to 150C IO = 350mA TJ = -55 to 150C IO = 5mA to 500mA VIN = 19V IO = 200mA TJ = -55 to 150C VIN = 14.8V to 30V TJ = -55 to 150C VN Output Noise Voltage f = 10Hz to 100kHz f = 120Hz VIN = 15V to 25V IO = 350mA 0.7 IO = 300mA IO = 100mA TJ = -55 to 150C 58 58 IO = 5mA to 500mA VIN = 19V VIN = 19V 4 4 4 10 4 0.1 0.2 75 72 72 2 300 1.0 1.2 2.5 600 1.4 4.8 0.7 300 1.0 1.2 18 18 18 60 6 0.5 0.8 480 55 55 2.5 600 1.6 dB V mA A mV C 75 4 60 30 120 120 6 0.5 mA 0.8 480 mV mA mV VIN = 14.8V to 27V 11.64 12.36 11.40 12.60 VIN = 19V IP78M12A IP140MA-12 Min. Typ. Max. 11.88 12 12.12 IP78M12 IP140M-12 Min. Typ. Max. 11.50 12 12.50 V Units
DVO
Line Regulation
DVO
IQ
Load Regulation Quiescent Current
DIQ
Quiescent Current Change
mV
DVIN DVO
Isc Ipk
Ripple Rejection Dropout Voltage
Short Circuit Current VIN = 35V Peak Output Current VIN = 19V Average Temperature Coefficient of VO IO = 5mA
1) All characteristics are measured with a capacitor across the input of 0.22mF and a capacitor across the output of 0.1mF. All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (tp voltage changes due to changes in internal temperature must be taken into account separately. 2) Test Conditions unless otherwise stated: TJ = 25C PMAX = 2W for H Package (TO-39) PMAX = 1.05W for J Package (CERDIP) PMAX = 15W for SG Package (SMD1)
10ms, d 5%). Output
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
Prelim.7/00
IP140MA SERIES IP140M SERIES IP78M00A SERIES IP78M00 SERIES
ELECTRICAL CHARACTERISTICS
Parameter Test Conditions IO = 100mA VO Output Voltage IO = 5mA to 350mA PD PMAX VIN = 18V to 30V IO = 200mA IO = 500mA TJ = -55 to 150C VIN = 17.5V to 30V 4 4 4 12 4 0.1 0.2 90 IO = 300mA IO = 100mA TJ = -55 to 150C 57 57 70 70 2 300 0.7 1.0 1.5 2.5 600 1.4 6.0 0.7 300 1.0 1.5 22 22 22 75 6 0.5 0.8 600 54 54 2.5 600 1.6 dB V mA A mV C 90 4 60 30 150 150 6 0.5 mA 0.8 600 mV mA mV VIN = 20V to 30V TJ = -55 to 150C VIN = 20V to 26V TJ = -55 to 150C IO = 350mA TJ = -55 to 150C IO = 5mA to 500mA VIN = 23V IO = 200mA TJ = -55 to 150C VIN = 18V to 30V TJ = -55 to 150C VN Output Noise Voltage f = 10Hz to 100kHz f = 120Hz Ripple Rejection Dropout Voltage Isc Ipk VIN = 18.5V to 28.5V IO = 350mA Short Circuit Current VIN = 35V Peak Output Current VIN = 23V Average Temperature Coefficient of VO IO = 5mA IO = 5mA to 500mA VIN = 23V VIN = 23V 14.55 15.45 14.25 15.75 VIN = 23V IP78M15A IP140MA-15 Min. Typ. Max. 14.85 15 15.15 IP78M15 IP140M-15 Min. Typ. Max. 14.40 15 15.60 V Units
DVO
Line Regulation
DVO
IQ
Load Regulation Quiescent Current
DIQ
Quiescent Current Change
mV
DVIN DVO
1) All characteristics are measured with a capacitor across the input of 0.22mF and a capacitor across the output of 0.1mF. All characteristics except noise voltage and ripple rejection ratio are measured using pulse techniques (tp voltage changes due to changes in internal temperature must be taken into account separately. 2) Test Conditions unless otherwise stated: TJ = 25C PMAX = 2W for H Package (TO-39) PMAX = 1.05W for J Package (CERDIP) PMAX = 15W for SG Package (SMD1)
10ms, d 5%). Output
Semelab plc.
Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
Prelim.7/00

▲Up To Search▲

Price & Availability of IP140MA

	To Download IP140MA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .